Tarmac Cold Feed Bins specifications
Top Opening | Capacity | Feeder Table |
---|---|---|
6.5’ x 12’ | 18 Tons | 18” |
10’ x 14’ | 30 Tons | 24” |
12’ x 14’ | 40 Tons | 36” |
Assuming 100 lbs/ft3 material
Tarmac Cold Feed Bins specifications
Top Opening | Capacity | Feeder Table |
---|---|---|
6.5’ x 12’ | 18 Tons | 18” |
10’ x 14’ | 30 Tons | 24” |
12’ x 14’ | 40 Tons | 36” |
Assuming 100 lbs/ft3 material
BUILT to Withstand Years of Abuse
Tarmac Cold Feed Bins
Tarmac cold feed bins are built to withstand years of abuse from aggregate and front-end loaders.
Our standard aggregate cold feed bins have 14′ wide x 10′ long compartments, 1/4″ steel sidewalls, and top reinforced lip. Additionally, horizontal outside bin wall reinforcements are made of angle steel with ratchet style turnbuckle gate adjusters.
See our RAP BINS here.
- 24″ wide x 8′ long feeder belt assemblies made with 8″ channel steel and including 14″ lagged head pulley
- 12″ winged self-cleaning tail pulley
- Rear shaft tensioning adjustment
- 2-ply rubber belting
- CEMA “B”- rated
- No-grease permanent seal idler rollers located on 7″ centers
Feeder belt assemblies are equipped with premium efficiency motors for VFDs.
36″ wide horizontal collector belt conveyor running under the feeder belt assemblies and terminating at the structural legs of the lead cold feed bin. Your conveyor is made with 8″ channel steel and including 16″ lagged head pulley, 14″ winged self-cleaning tail pulley, rear shaft tensioning adjustment, 2-ply rubber belting, 35 degree 5″ CEMA “B”-rated no-grease permanent seal idler rollers on 4′ spacing and return rollers on 10′ spacing, 15 H.P.
Features for Reliability
Portable, skid mounted, or stationary units
Variable Frequency Drive feeder table drives
Structural supports to spread foundation load
Hand rails and walkways
No flow switch
Options
Super-Duty Grizzly
Bin Extensions to increase bin capacity
Other needs?